Product Descreption :
COMPRESSED AIR/GAS DRYERS
Compressed Air/Gas Dryers are mainly used in industries for various applications in pneumatic tools, pneumatic instruments, pneumatic machines and in a variety of production processes. The consequences of using wet air are rust and scale deposits in steel pipes, increased resistance in flow, malfunctioning of process control instruments, corrosion and damage to electromagnetic valves and pneumatic system, peeling and blistering effect on spray painted surface etc. Thus it will affect the quality of product and lead to excessive maintenance cost. Ideal compressed Air System: Air from the compressor has excessive moisture and contaminants. The sketch below shows a typical Compressed air system to remove these damaging impurities and get Clean and Dry air. When compressed to 7 Kg/cm2g the temperature of discharge air reaches around 140oC. The after cooler and Separator installed after the compressor will cool the air, and removes 90% of moisture and oil. For instance, when the compressor takes in 100 NM3/hr of ambient air at 40oC and 50% relative humidity, at 7 Kg/cm2g the after cooler will condense an average of 30 liters of water in 24 hours. If the outlet air temperature from the after cooler is 40oC, it still contains 8000 ppm moisture. At 45oC compressed air contains 10,500 ppm, at 50oC, 13,500 ppm moisture which is removed by Air Dryer. Therefore, lower the temperature of air at dryer inlet, smaller would be the size of Air Drying Unit.
We manufacture a wide range of Compressed Air Dryers Machine, which are great in demand in domestic and international market.
Few of them are listed below for your reference :
The compressed air dryers based on PSA technology has a broad range of commercial applications. They are the following:
· Replace Bottle Nitrogen
· Air Bearings
· Thermal Test Equipment
· Dry Boxes
· Purge Electrical Boxes
· Pneumatic Instrumentation